6 V6-3.7L (2009)
5.
Confirm fuse block is not damaged (discolored or deformed) around blower relay area.
-
If fuse block is not damaged, proceed to Step 6.
-
If fuse block is damaged, contact Technical Assistance Hotline.
6.
Gently disconnect six (6) tabs holding under cover to main fuse block.
NOTE:
Be careful not to break tabs with screwdriver.
7.
Push blower relay terminals (which normally creates a snapping noise) back into place and give several tugs to confirm all terminals are secure. If
terminals cannot be secured, the fuse block is damaged; contact Technical Assistance Hotline.
NOTE:
^
Large wires that connect to blower relay are (1) Red and (2) Pink/Yellow.
^
Small wires that connect to blower relay are (1) Pink and (2) Black.
