6 V6-3.7L (2009)
Headlamp Control Module: Service and Repair
Auto Light/Wiper Control Module Removal/Installation
AUTO LIGHT/WIPER CONTROL MODULE REMOVAL/INSTALLATION
CAUTION:
-
When replacing the auto light/wiper control module, the configuration procedure must be performed before removing the auto light/wiper control
module. Replacing the auto light/wiper control module without performing the configuration procedure will result in system malfunction.
NOTE:
-
Auto light-off system are integrated with the auto light/wiper control module.
1. Perform the auto light/wiper control module configuration when replacing it. See: Lighting and Horns/Testing and Inspection/Programming and
Relearning/Auto Light/Wiper Control Module Configuration
2. Disconnect the negative battery cable.
3. Remove the dashboard under cover (Driver side). See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Dashboard Under Cover Removal/Installation
4. Remove the nut.
5. Disconnect the connectors.
6. Remove the auto light/wiper control module.
7. Install in the reverse order of removal.