6 V6-3.7L (2009)
Accelerator Pedal Position Sensor: Testing and Inspection
ACCELERATOR PEDAL POSITION (APP) SENSOR INSPECTION [MZI-3.7]
Sensor Output Value Inspection
1. Switch the ignition to ON.
2. Inspect the following items using the PID/DATA monitor function. See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Mode 6 Data/Diagnostic Monitoring Test Results
-
Verify that the sensor output value change smoothly while throttle valve is gradually depressed.
-
APP1
-
APP2
-
If verified, go to the next step.
-
If not as verified, replace the accelerator pedal. See: Powertrain Management/Fuel Delivery and Air Induction/Accelerator Pedal/Service
and Repair
-
Verify that the sensor output value is as indicated in the table below according to the condition of the accelerator pedal.
-
APP1
-
APP2
-
If not as verified, replace the accelerator pedal. See: Powertrain Management/Fuel Delivery and Air Induction/Accelerator Pedal/Service and
Repair
Specification