6 V6-3.7L (2009)
Alignment: Service and Repair
Front Wheel Alignment
FRONT WHEEL ALIGNMENT
Specification (Unloaded)*1
Front wheel alignment
*1
Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2
Difference between left and right must not exceed 1°30'.
Maximum Steering Angle Adjustment
1. Loosen the tie-rod end locknuts.
2. Remove the steering gear boot clamp.
3. Turn the tie rods.
Standard length L
-
15.7-22.7 mm {0.619-0.893 in}
4. Turn the tie rods equally to provide the correct maximum steering angle.
5. Tighten the tie-rod end locknuts.
Tightening torque
-
69-98 Nm {7.1-9.9 kgf-m, 51-72 ft-lbf}
6. Verify that the boot is not twisted, and install the boot clamp.
7. Adjust the toe-in after adjusting the steering angle.
Total Toe-in Adjustment
