6 V6-3.7L (2009)
Oil Seal Assembly Note
1. Install the oil seal in the front pump body using the
SST and plastic hammer.
Side Plate Assembly Note
1. Install the side plate in the position shown in the figure.
Rotor Assembly Note
1. Install to the front pump body so that area B of the groove is on the rear pump body side as shown in the figure.
Cam Ring Assembly Note
1. Install the cam ring in the front pump body with the mark facing upward.
Rear Pump Body Assembly Note
1. After installing the rear body, manually turn the shaft to verify that it rotates smoothly.
