6 V6-3.7L (2009)
Steering Column Cover: Service and Repair
COLUMN COVER REMOVAL/INSTALLATION
1. Pull down the steering wheel.
2. Remove the blind rubber. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Meter Hood Removal/Installation
3. Pull the upper column cover in the direction of the arrow in the order of (1) and (2), then remove the upper column cover while detaching the tabs
and pin.
4. Pull up the steering wheel.
5. Remove the lower column cover in the direction of the arrow (4) while keeping it open in the direction of the arrow (3) shown in the figure.