6 V6-3.7L (2009)
1. Jack up the vehicle to the unloaded condition, and support the trailing link using a jack.
2. Loosen the inner side of the rear upper arm.
3. Remove the outer side of the rear upper arm.
4. Remove the rear upper arm.
Rear Upper Arm Bushing Removal Note
1. Press the upper arm bushing out using the SSTs.
Substitution SST
-
49 G028 208
Outer diameter: 36-39 mm {1.42-1.53 in}
Height: 32 mm {1.3 in} or more
-
49 B034 202A
Outer diameter: 46 mm {1.8 in} or more
Inner diameter: 42 mm {1.7 in} or more
Plate thickness: 1 mm {0.04 in} or more
Rear Upper Arm Bushing Installation Note
1. Mark the new bushing as shown in the figure.
2. Set the bushing to the rear upper arm as shown in the figure.