6 V6-3.7L (2009)
Brake Caliper Component Removal Note
1. Remove the brake caliper component and suspend it out of the way using a cable.
Nut (Lower Arm) Removal Note
WARNING:
-
If the stud bolt of the front knuckle is loosened when removing the front lower arm outer nut, replace the stud bolt with a new one. If the stud bolt
is reused, it could fall off while driving, resulting in serious injury or death, and damage to the vehicle.
Wheel Hub, Steering Knuckle Component Installation Note
1. Apply grease (L2Y1 33247) to the wheel bearing inner race and drive shaft contact surface (Area A in figure).
2. Install the wheel hub, steering knuckle component.
