6 V6-3.7L (2009)
b. Install the front shock absorber and coil spring to the SST so that the coil spring is set to the position shown in the figure.
2. Compress the coil spring using the SST.
3. Remove the piston rod nut.
Front Shock Absorber Assembly Note
1. Check the marked line to verify if the part is for the left or right side.
-
RH: One marked line
-
LH: Two marked lines
Coil Spring Assembly Note
1. Compress the coil spring using the SST.
2. Install the shock absorber with the lower end of the coil spring seated on the step of the lower spring seat.
Mounting Rubber Assembly Note
1. Install the mounting rubber stud bolt with its bolt head aligned with the dent of the upper spring seat.