mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

A/T - Fluid Leaks From Servo Cover|Page 3365 > < Solenoid Valve Inspection [FS5A-EL]|Page 3356
Page 1
background image

Band Apply Servo: Customer Interest
A/T - Fluid Leaks From Servo Cover

Bulletin No: 05-015/09

Last issued: 09/04/2009

Subject
ATF LEAK FROM A/T SERVO COVER

APPLICABLE MODEL(S)/VINS
2009 Mazda6 with 6AT (AW6A-EL)
2007-2009 CX-7 with 6AT (AW6A-EL/AW6AX-EL) built before JM3 ER **** 9* 232339 November 1, 2008
2007-2009 CX-9 with 6AT (AW6A-EL/AW6AX-EL) built before JM3 TB **** 9* 170029 November 1, 2008

DESCRIPTION

Some vehicles may leak ATF from a servo cover (A) on a 6 speed automatic transmission (AW6A-EL/AW6AXEL). This is caused by damage to the
servo cover O-rings (B) during the production process. The production process has been changed to correct this concern.

Customers having this concern should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

1. Verify customer concern.

2. Lift up the vehicle

3. Remove the under cover.

4. Remove the drain plug and drain ATF into a clean container (ATF will be re-used).

A/T - Fluid Leaks From Servo Cover|Page 3365 > < Solenoid Valve Inspection [FS5A-EL]|Page 3356