mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

A/T - Fluid Leaks From Servo Cover|Page 3532 > < A/T - Fluid Leaks From Servo Cover|Page 3530
Page 6
background image

Some vehicles may leak ATF from a servo cover (A) on a 6 speed automatic transmission (AW6A-EL/AW6AXEL). This is caused by damage to the
servo cover O-rings (B) during the production process. The production process has been changed to correct this concern.

Customers having this concern should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

1. Verify customer concern.

2. Lift up the vehicle

3. Remove the under cover.

4. Remove the drain plug and drain ATF into a clean container (ATF will be re-used).

CAUTION:

When installing the drain plug, use a new gasket. Tightening torque is 39.2 Nm (28.9 lb/ft).

A/T - Fluid Leaks From Servo Cover|Page 3532 > < A/T - Fluid Leaks From Servo Cover|Page 3530