6 V6-3.7L (2009)
Clutch Slave Cylinder: Removal and Replacement
CLUTCH RELEASE CYLINDER REMOVAL/INSTALLATION
CAUTION:
-
Fluid will damage painted surfaces. Be careful not to spill any on painted surfaces. If it is spilled, wipe it off immediately.
NOTE:
-
If clutch system-related hydraulic parts are removed, supply brake fluid, bleed air, and inspect for fluid leakage after the installation.
1. Remove the aerodynamic under cover No.2. See: Body and Frame/Splash Guard/Service and Repair/Aerodynamic Under Cover No.2
Removal/Installation
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.