6 V6-3.7L (2009)
Starter Interlock Switch Installation Note
CAUTION:
-
The starter interlock switch may not operate normally if the rod is pushed in. Do not push in the rod when installing the starter interlock switch.
1. Insert a new starter interlock switch into the pedal bracket hole in the direction of arrow A.
2. While pressing the starter interlock switch in the direction of arrow A, slide it until it locks in the direction of arrow B to secure it.
3. Fully depress the clutch pedal in the direction of arrow C and adjust the push rod protrusion of the starter interlock switch.
