6 V6-3.7L (2009)
Fluid Pressure Sensor/Switch: Service and Repair
OIL PRESSURE SWITCH REMOVAL/INSTALLATION [FS5A-EL]
WARNING:
-
A hot transaxle and ATF can cause severe burns. Turn off the engine and wait until they are cool.
1. Disconnect the negative battery cable.
2. Remove the aerodynamic under cover NO.2. See: Body and Frame/Splash Guard/Service and Repair/Aerodynamic Under Cover No.2
Removal/Installation
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.