6 V6-3.7L (2009)
6. Perform the "Road Test". See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Road Test/FS5A-EL Transmission
Secondary Control Valve Body
1. Remove the secondary control valve body.
a. Disconnect the negative battery cable.
b. Remove the battery and battery tray.
c. Remove the PCM and PCM bracket. See: Powertrain Management/Computers and Control Systems/Engine Control Module/Service and
Repair
d. Remove the aerodynamic under cover NO.2. See: Body and Frame/Splash Guard/Service and Repair/Aerodynamic Under Cover No.2
Removal/Installation
e. Clean the transaxle exterior throughout with a steam cleaner or cleaning solvents.
f.
Drain the ATF. See: Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Automatic Transaxle Fluid (ATF)
Replacement [FS5A-EL]
g. Remove the oil cover. See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and Replacement/Control Valve
Body Removal/Installation [FS5A-EL]
h. Remove the secondary control valve body. See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and
Replacement/Control Valve Body Removal/Installation [FS5A-EL]
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
4. Add ATF. See: Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Automatic Transaxle Fluid (ATF) Replacement
[FS5A-EL]
5. Perform the "Mechanical System Test". See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Mechanical System
Test/FS5A-EL Transmission
6. Perform the "Road Test". See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Road Test/FS5A-EL Transmission
