6 V6-3.7L (2009)
Continuity Inspection
1. Disconnect the negative battery cable.
2. Remove the air cleaner component. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
3. Remove the TCM. See: Relays and Modules - Transmission and Drivetrain/Relays and Modules - A/T/Control Module/Service and Repair/TCM
Removal/Installation [AW6A-EL]
4. Inspect the continuity between the following terminals.
-
If there is continuity, inspect the coupler component.
-
If the coupler component is normal, perform the following action.
Solenoid valve continuity
