6 V6-3.7L (2009)
Transmission Temperature Sensor/Switch: Testing and Inspection
Transaxle Fluid Temperature (TFT) Sensor Inspection [FS5A-EL]
TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR INSPECTION [FS5A-EL]
CAUTION:
-
Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the
connector when disconnecting it.
On-Vehicle Inspection
1. Disconnect the coupler component connector.
a. Disconnect the negative battery cable.
b. Remove the air cleaner component. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
c. Disconnect the coupler component connector.
2. Measure the resistance between the coupler component terminal E and H.
-
If there is any malfunction, replace the coupler component. See: Service and Repair/Transaxle Fluid Temperature (TFT) Sensor
Removal/Installation [FS5A-EL]
TFT sensor specification
Off-Vehicle Inspection
1. Place the TFT sensor and a thermometer in ATF as shown, and heat the ATF gradually.