6 V6-3.7L (2009)
Wiper Motor: Removal and Replacement
WINDSHIELD WIPER MOTOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the windshield wiper arm and blade. See: Wiper Arm/Service and Repair
3. Remove the cowl grille. See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair/Cowl Grille Removal/Installation
4. Remove the cover, and remove the bolt.
5. Remove the windshield wiper motor.
6. Install in the reverse order of removal.