626 L4-1991cc 2.0L DOHC (1993)
4. Separate the oil pan from the oil pan upper block by using a scraper or a separator tool.
5. Remove the oil pan.
Oil Pan Installation Note
CAUTION: If the bolts are reused, remove the old sealant from the bolt threads. Tightening a bolt that has old sealant on it can cause thread damage.
1. Remove all foreign material from the contact surfaces.
2. Apply silicone sealant to the oil pan as shown.
3. Install the oil pan within five minutes of applying the sealant.
Tightening torque: 19 - 25 Nm (1.9 - 2.6 kgf m, 14 - 18 ft lbf)
