mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

A/C Evaporator - Freezes Up|Page 3959 > < A/C - 0 Ring Replacement|Page 3950
Page 1
background image

Evaporator Core: All Technical Service Bulletins
A/C Evaporator - Freezes Up

Category 16
Applicable Model/s 1986-87 626
Subject EVAPORATOR FREEZE-UP
Bulletin No.

043/89

Issued

12/29/89

Revised

DESCRIPTION

Some reports have been received regarding the A/C evaporator on 626 vehicles which "freezes-up" and causes insufficient cooling performance. In most
cases, this condition is caused by a defective thermistor and/or a thermistor that is incorrectly installed in the evaporator. If a customer complains about
insufficient cooling performance, follow the procedures below in order to diagnose and repair evaporator freeze-up vehicles.
REPAIR PROCEDURES

1.

Diagnosis

If the following conditions occur on the vehicle, which may be caused by the evaporator freeze-up, proceed to Step 2.

^

Insufficient cooling from center louver.

^

Compressor does not cycle properly. (Magnet clutch is engaged all the time.)

^

Air volume from vents is reduced noticeably.

A/C Evaporator - Freezes Up|Page 3959 > < A/C - 0 Ring Replacement|Page 3950