626 L4-1998 cc 2.0L SOHC Turbo FE (1986)
2.
Installation of Solenoid Valve
A.
Without Turbo
1)
Remove one unused bolt (# 10, upper side) which is screwed in the firewall near the canister.
2)
Install rubber mount (# 19) and tighten it.
Tightening Torque:
70-95 in.lb.
3)
Install the solenoid valve to rubber mount with nut (# 10) and tighten it.
Tightening Torque:
70-95 in.lb.
B.
With Turbo
1)
Remove the duty solenoid valve.
2)
Install the solenoid valve between the duty solenoid valve and the rubber mount of duty solenoid valve.
Tightening Torque:
70-95 in.lb. (81-109 cm-kg)
