mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

All Other Service Bulletins for Ignition Switch: > < Recall 90V118000: Faulty Ignition Switch/Circuit Defects
Page 1
background image

Ignition Switch: Customer Interest
Ignition Switch - Inoperative Electrical Systems

Category     

Applicable Model/s      

Subject

Bulletin No. 055/87

15

1986-1987 626

IGNITION SWITCH

Issued

12/28/87

Revised

DESCRIPTION

The electrical systems such as wiper, air conditioner fan, etc. may sometimes become inoperative due to improper contact inside the ignition switch. This
malfunction may result in an inoperative cooling fan in some cases, or possibly an overheated engine in the worst case.

In order to make a secure internal contact, the terminal base has been thickened to increase the contact pressure since November, 1986..

AFFECTED VIN RANGE

REPAIR PROCEDURE

Install the modified part. Because the part number of the IG switch has not been changed, please distinguish one new part by the stamp on the IG switch
as follows.
NOTE:
Please use the IG switches which were produced on and after November 6, 1986.

All Other Service Bulletins for Ignition Switch: > < Recall 90V118000: Faulty Ignition Switch/Circuit Defects