626 L4-1998 cc 2.0L SOHC Turbo FE (1986)
Suspension Mode Switch: Testing and Inspection
Indicator Light
1.
Place ignition switch in On position.
2.
Alternately switch on the ``SPORT'' and ``NORMAL'' Auto Adjusting Suspension (AAS) switches. Check to ensure indicator light illuminates
only when ``SPORT'' switch is operated.
3.
If indicator light does not illuminate as specified, disconnect 21 pin connector from AAS control unit, then ground O and P terminals of connector
using suitable jumper wire.
4.
Place ignition switch in On. If indicator switch illuminates, AAS switch or AAS control unit may be defective, replace as required. If indicator
light does not illuminate, replace light bulb.