626 L4-2.0L DSL (1984)
MANIFOLD GAUGE
Step 1. Connect a manifold gauge set to the service valves and observe the refrigerant pressure.
Note:
The ambient temperature must be 32~F (0~C) or above.
CHECKING RESULTS
A.
If the refrigerant pressure is below 30 +/- 3 PSI (2.11 kg/sq.cm) check the system for a refrigerant leak.
B.
If the refrigerant pressure is above 30 +/- 3 PSI (2.11 kg/sq.cm) proceed to Step 2.
FUSE BLOCK
Step 2. Check to make sure that the following (5) fuses are ok before proceeding to Step 3.
FUSE NAME
AMP.
Engine
15
Cooling Fan
20
Air Cond.
15
Meter
10
Audio
15
Use the designated fuse if blown.
INDICATOR LIGHT
Step 3. Turn on the A/C switch and observe the condition of the indicator light.
CHECKING RESULTS