626 L4-2000 1970cc (1982)
the axle shaft.
CAUTION:
Be careful not to damage the shaft when using the grinder and chisel.
REMOVAL OF BEARING
1.
Fit the attachment hooks to the bearing, then secure it firmly with the screws.
Secure the rods with the rod stoppers so that the rods do not come off the attachment.
2.
Place the plate on the axle shaft, then adjust the adjusting nuts so that the plate and the axle shaft are at 90~ from each other.
3.
Secure the axle shaft in a vice using copper plates. Then turn the center bolt to remove the bearing.
PARTS INFORMATION
PART NUMBER
DESCRIPTION
APPLIED MODEL
49S1 20 520A
Rear Axle Shaft Bearing Puller
1986-87 B2000
49S1 21 523A
Attachment
For all RWD vehicles except 1986-87 RX-7
and 1979-87 B2000/1983-84 B2200
Note:
The rear axle shaft bearing puller includes the following parts:
PART NUMBER
DESCRIPTION
49S1 20 521
Plate