mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

A/C - New Materials to be Inserted Into Manual|Page 2627 > < A/C - New Materials to be Inserted Into Manual|Page 2625
Page 9
background image

CHECKING RESULTS

A.

If the fan operates, reconnect the water temperature switch connector and proceed to Step 3.

B.

If the fan does not operate, reconnect the water temperature switch connector and proceed to Step 2.

COOLING FAN CONNECTOR

Step 2. Check the yellow wire for power at the cooling fan connector.

CHECKING RESULTS

A.

If power exists, repair or replace the cooling fan motor.

B.

If no power exists, check the yellow wire for a loss of continuity between the 20 AMP fuse marked "Cooling Fan" and the cooling fan connector.

A/C RELAY CONNECTOR

Step 3. Check the blue wire for power at the A/C relay connector.

CHECKING RESULTS

A.

If no power exists, check the blue wire for a loss of continuity between the A/C switch connector and the A/C relay connector.

TROUBLESHOOTING THE A/C RELAY

B.

If power exists, follow the (3) steps below in order to troubleshoot the A/C relay.

A/C - New Materials to be Inserted Into Manual|Page 2627 > < A/C - New Materials to be Inserted Into Manual|Page 2625