626 L4-2000 1998cc (1983)
Idle Switch: Testing and Inspection
Fig. 15 Inspection Of Idle Switch
1.
Start and operate engine at idle speed until normal operating temperature is obtained.
2.
Connect a suitable tachometer onto engine as per manufacturer's instructions.
3.
Connect a suitable voltmeter onto idle switch electrical connector terminals Fig. 15.
4.
With engine at idle speed, voltmeter should indicate approximately 12 volts.
5.
With engine speed at 1200-1300 RPM, voltmeter should indicate approximately 1.5 volts.
6.
If voltage obtained is not as specified, turn idle switch adjusting screw until voltmeter indicates specified voltage.