626 L4-2000 1998cc (1983)
Distributor Advance Unit: Customer Interest
Distributor - Governor Set & Oil Seal Modification
Category Applicable Model/s
Subject
Bulletin No. 003/85
5
1986 B2000
DISTRIBUTOR GOVERNOR SET
Issued
10/4/85
1983 - 1985 626
& OIL SEAL MODIFICATION
Revised
DISTRIBUTOR GOVERNOR SET & OIL SEAL MODIFICATION
DESCRIPTION
Modified governor sets and oil seals are available as service parts for 1986 B2000 and 1983-1985 626.
1.
A resin damper has been installed in the governor set as a modification in order to eliminate the noise from the distributor.
The governor noise usually occurs when the engine operates at idle. Use a stethoscope to confirm that the noise originates from the distributor.
2.
The material of the oil seal has been changed to improve the sealing ability.
If a customer complains about the governor noise or the oil leakage from the distributor, replace the governor set or oil seal with the modified one.
With regard to B2000, the modified governor set and oil seal have been installed in the distributor since the production of June, 1985.
VIN OF PRODUCTION CHANGE
B2000 Short Bed:
JM2UF111 G0556739
June, 1985
Long Bed:
JM2UF211 G0556739 June, 1985
PARTS INFORMATION
PART NUMBER
DESCRIPTION INTERCHANGEABILITY
APPLIED
NEW
OLD
MODEL
FE85 18 V10A
FE85 18 V10
Governor Set
NEW --> OLD
1986 B2000
F807 18 216
8173 18 216
Oil Seal
NEW --> OLD
1986 B2000
FE01 24 330A
FE01 24 330
Governor Set
NEW --> OLD
1983-85 626
F807 18 216
8173 18 216
Oil Seal
NEW --> OLD
1983-85 626
