626 L4-2000 1998cc (1983)
Suspension Strut / Shock Absorber: Technical Service Bulletins
Shock Absorber - Modified Dust Covers, Bump Stoppers
Category Applicable Model/s Subject
Bulletin No. 002/85
13
626
FRONT & REAR ADJUSTABLE
Issued
6/17/85
SHOCK ABSORBER
Revised
DESCRIPTION
A modified dust cover has been installed on 626 front and rear adjustable shock absorbers since the production on December 2, 1983.
When replacing the front or rear shock absorbers on vehicles prior to this production date, always replace the dust covers and bump stoppers with the
modified ones.
FRONT & REAR ADJUSTABLE SHOCK ABSORBER
NOTE:
When installing the bump stopper, apply a light coat of silicon lubricant or multi-purpose grease on the piston rod to ease the installation of the bump
stopper. Wipe the excess lubricant off the piston rod after installation of the bump stopper.
VIN OF PRODUCTION CHANGE
626 Sedan:
JM1GC221 E1620922
December 2, 1983
Hatchback:
JM1GC241 E1605842 December 2, 1983
Coupe:
JM1GC311 E1610574 December 2, 1983
PARTS INFORMATION
PART NUMBER
DESCRIPTION
INTERCHANGEABILITY
NEW
OLD
G054 34 111
G054 34 110
Bump Stopper (Front)
NEW - OLD
G030 34 015A (Set)
Dust Cover (Front)
NEW - OLD
G030 28 111 G054 28 110A
Bump Stopper (Rear)
NEW - OLD
G030 28 015B (Set)
Dust Cover (Rear)
NEW - OLD