626 L4-2184cc 2.2L SOHC F2 (1989)
Cruise Control Servo Cable: Testing and Inspection
Fig. 4 Checking Actuator Clutch Solenoid. Models w/Turbo
Fig. 5 Checking Actuator Clutch Solenoid. Models Less Turbo
Fig. 6 Checking Control Cable Operation. Miata, MX-6 & 626
1.
On turbo models, use an ohmmeter to measure the actuator clutch solenoid resistance as shown in Fig. 4.
2.
On non-turbo models, use an ohmmeter to measure the actuator clutch solenoid resistance as shown in Fig. 5.
3.
On all models, connect terminals to a 12 volt power source and ground as shown in Fig. 6. If control cable does not respond as shown, replace
actuator.