626 L4-2184cc 2.2L SOHC F2 (1989)
10. Tighten the throttle sensor mounting screws.
11. Recheck that the BLUE wire voltage is specifications, as indicated below.
Terminal Specifications
12. Hold the throttle valve fully open and check that the BLUE wire voltage is within specifications, as indicated above.
13. Check that the BLUE wire voltage increases smoothly when opening the throttle valve from closed to fully open.
14. If not correct, replace the throttle sensor.
15. Turn the ignition off.
16. Disconnect the adapter harness and reconnect the throttle sensor connector.
17. Disconnect the negative battery terminal and depress the brake pedal for at least 5 seconds to eliminate the control unit malfunction memory.
