mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Power Locks > < Diagram Information and Instructions|Page 7197
Page 1
background image

Keyless Entry Transmitter Battery: Service and Repair

Replacing the Transmitter Battery

1. Snap apart the transmitter with a thin coin or other suitable tool.
2. Install the new batteries with the 0 side facing up.

Battery specification: Lithium CR2016 x 2 or the equivalent

3. Snap the transmitter together.

Note: The batteries will last about 2 years when used an average of 10 times per day.

Power Locks > < Diagram Information and Instructions|Page 7197