626 V6-2496cc 2.5L DOHC (1995)
4.
Remove the two (2) drip rail mounting screws located at the rear of the sunroof. Requires a 2.5 mm allen wrench.
^
Pull the drip rail forward and remove it from the rear guides.
5.
Free the four (4) guide clips from the frame grooves using a flat head screwdriver.
^
Remove the sunshade.
^
Remove guide clips.
6.
Install four (4) new guide clips into the sunshade.
7.
Install sunroof parts in reverse order of removal.
NOTE:
^
When installing the drip rail, ensure that it is installed under the rear guides on the position plate.
^
Refer to section S of the workshop manual for glass adjustment procedures.
8.
Verify repair and proper sunroof operation.
PARTS INFORMATION
Part Number
Description
Qty.
KA78 YV 713
Sunroof Sunshade
1
Clips
NOTE:
4 guide clips per package.