626 V6-2496cc 2.5L DOHC (1995)
5. Install the fuel injector squarely into the distribution pipe while turning it back and forth.
Aligning Injector Tab With Key-Way (Notch) In Fuel Rail
6. Fit the fuel injector tab into the notch in the distribution pipe.
7. Install the harness.
Tightening torque: 2.5-3-5 N.m (22-31 in-lb)
FUEL DISTRIBUTOR INSTALLATION
1. Install new fuel injector insulators.
2. Install the insulators, making sure that each is pressed in fully, and that it is not twisted or bent. Incorrectly installed insulators can cause rough
idle.