626 V6-2496cc 2.5L DOHC (1995)
Transaxle Control Module (TCM): Service and Repair
REPLACEMENT
1. Disconnect the negative battery cable.
2. Remove the side wall.
3. Disconnect the transaxle control module connector.
4. Remove the bolts shown in the figure, and remove the transaxle control module.
5. Install the new transaxle control module.
Tightening torque: 19-25 N.m (14-18 ft-lb)
6. Connect the transaxle control module.
7. Install the side wall.
8. Connect the negative battery cable.
