626 V6-2496cc 2.5L DOHC (1995)
15. Tighten the manual shaft nut by using a torque wrench.
Tightening torque: 32-46 N-m (24-33 ft-lb)
16. Verify that the selector lever range position and transaxle range switch are aligned; then connect the selector cable and install a new spring pin and
clip.
17. Check continuity of the transaxle range switch.
18. Connect the transaxle range switch connector.
19. Install the air cleaner assembly, fresh air duct, and resonance chamber.
20. Connect the negative battery cable.
21. Check operation of the transaxle range switch.