mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
Transaxle Fluid Temperature Sensor <--> [Transmission Temperature Sensor/Switch, A/T] > < Electrical Specifications|Page 5420

626 V6-2496cc 2.5L DOHC (1995)

Page 1
background image

Input/Turbine Speed Sensor: Service and Repair

REPLACEMENT

1. Disconnect the negative battery cable.
2. Remove the resonance chamber, fresh air duct, and air cleaner assembly.
3. Remove the fuel filter mounting nuts.
4. Disconnect the input/turbine speed sensor connector.

5. Remove the input/turbine speed sensor.
6. Apply ATF to a new O-ring and install it on a new input/turbine speed sensor.
7. Install the input/turbine speed sensor.

Tightening torque: 7.9-10.7 N-m (70-95 in-lb) 

8. Connect the input/turbine speed sensor connector.
9. Install the fuel filter mounting nuts.

10. Install the resonance chamber, fresh air duct, and air cleaner assembly.
11. Connect the negative battery cable.

Transaxle Fluid Temperature Sensor <--> [Transmission Temperature Sensor/Switch, A/T] > < Electrical Specifications|Page 5420