626 V6-2496cc 2.5L DOHC (1995)
14. Remove the bolts shown in the illustration and remove the rear separator plate and gaskets.
15. Remove the main/rear gaskets and separator from the rear control valve body.
16. Remove the rubber balls and oil strainers from the rear control valve body.
17. Remove the rubber balls and oil strainers from the main control valve body.
WARNING: Using compressed air can cause dirt and other particles to fly out, causing injury to the eyes. Wear protective eye-wear
whenever using compressed air.
18. Clean the removed parts with cleaning solvent, and dry them with compressed air. Clean out all holes and passages with compressed air.
Assembly
