626 V6-2496cc 2.5L DOHC (1995)
5. Install the pressure modifier valve, pressure modifier spring, stop plug, and stop pin.
6. Install the 1-2 shift spring, 1-2 shift valve, stop plug, and stop pin.
7. Install the 2-3 shift spring, 2-3 shift valve, stop plug, and stop pin.
8. Install the low-reducing valve, low-reducing spring, spring retainer.
9. Install the solenoid reducing valve, stop plug, and stop pin.
10. Install the converter relief valve, converter relief spring, and spring retainer.
Rear Control Valve Body
CAUTION: Denting or scratching these precisely machined components will reduce the ability of the transaxle to shift properly. When handing these
components or the valve body that contains them, be careful not drop or hit them.
NOTE: If a valve does not slide out under its own weight, place the valve body open-side down and tap on the valve body lightly with a plastic hammer.
