626 V6-2496cc 2.5L DOHC (1995)
Fig. 1 Exploded View Of Front Axle Components
1. Use special wheel bearing installer tool Nos. 49G030797, 49F027004 and 49F027009, or equivalents, and press in new front wheel bearing.
2. Install retaining ring.
3. Use special wheel bearing installer tool Nos. 49G033105 and 49F027009, or equivalents, and install front wheel hub.
4. Using tool No. 49V001795, or equivalent, install new oil seal, then apply grease to oil seal lip.
5. Install steering knuckle and loosely tighten shock absorber bolts and nuts.
6. Install lower arm ball joint and tighten to specifications.
7. Attach stabilizer and loosely tighten bolts and nuts.
8. Install tie rod end, ABS sensor, disc plate and brake caliper assembly, and tighten nuts and bolts to specifications.
9. Install new locknut, then tighten to 236-318 Nm (24.O-32.5 kgf.m, 173.6-235.O ft.lb) and stake it as shown.
10. Install wheel and lug nuts, then lower vehicle.
11. Tighten stabilizer and shock absorber bolts and nuts to specifications.
