626 ES V6-2.5L DOHC (1997)
2. Separate the oil pan from the lower cylinder block by using a scraper or a separator tool.
3. Remove the oil pan.
Inspection
Visually check for cracks, deformations and damage. Repair or replace if necessary.
Oil Pan Installation Note
CAUTION: If the bolts are reused, remove the old sealant from the bolt threads. Tightening a bolt that has old sealant on it can cause thread damage.
1. Remove all foreign material from the contact surfaces.
2. Apply silicone sealant to the oil pan as shown.