626 ES V6-2.5L DOHC (1997)
Audible Warning Device: Testing and Inspection
Pinpoint Test 19
Flowchart No.19 Symptom Even if the ignition key is left in the ignition switch, ignition key reminder warning alarm does not sound when any door is
opened
Possible cause
^
Damaged CPU
^
Damaged door switch
^
Open circuit in wiring harness
^
Poor connection of connector
Step 1
1. Remove the front side trim.
2. Remove the joint box attaching bolt and screw.
3. Remove the CPU from the joint box.
Voltmeter Connection
Action Chart
4. Make sure the ignition key is left in the ignition switch. 5. Measure the voltage at terminal 11 of the CPU connector on the joint box.
Step 2
1. Open any door.
Ohmmeter Connection
Action Chart
2. Check for continuity between terminal 1E of the CPU connector on the joint box and ground.