626 ES V6-2.5L DOHC (1997)
Action Chart
Step 12
1. Remove the trunk end upper trim and lower trim.
2. Turn the turn switch on (left or right).
3. Measure the voltage at terminal D (G/B) [626] or G (G/B) [MX-6] of the rear combination light connector.
Bulb Inspection
Action Chart
Step 13
1. Turn the ignition switch to LOCK.
2. Remove and check the bulbs.
Pinpoint Test 2
Flowchart No.2 Symptom Turn signal function does not operate (hazard light function operates)
Possible Cause
^
Burnt TURN 15A fuse
^
Damaged turn switch
^
Damaged flasher unit
^
Open or short circuit in wiring harness
^
Poor connection of connector Step 1
Fuse Location
Action Chart
Step 1
Check the TURN 15A fuse in the fuse block.