626 ES V6-2.5L DOHC (1997)
Locknut
1. Raise the staked portion of the locknut using a small cape chisel and a hammer.
2. Lock the hub by applying the brakes.
3. Remove the locknut.
INSPECTION
^
Inspect all parts and repair or replace as necessary.
INSTALLATION
^
Install in the reverse order of removal, referring to the following note:
Locknut
1. Install a new locknut and stake it as shown to 177 - 235 Nm (130 - 173 ft. lbs.).
2. Tighten the lateral link, trailing link and shock absorber bolts and nuts to just under the specified torque. Lower the vehicle and tighten all
bolts and nuts to the specified torques with the vehicle unladen.
AFTER INSTALLATION
^
Check the rear wheel alignment.
With Disc Brakes
