626 ES V6-2.5L DOHC (1997)
Seat Belt Height Adjuster: Customer Interest
Seat Belt - Difficult Shoulder Height Adjustment
Bulletin No.: 021/97
Issued: 11/18/97
Revised:
Category
S
Applicable Model/s
1994-97 626
Subject:
SEAT BELT SHOULDER HEIGHT DIFFICULT TO ADJUST
APPLICABLE MODELS
All 1994-97 626 vehicles
DESCRIPTION
The parts listed in this bulletin are newly established and should be utilized when repairs to the bottom spring are necessary. These parts are intended to
reduce unnecessary height adjuster assembly replacement.
REPAIR PROCEDURE
1.
Use a fiat head screwdriver to carefully remove the plastic height adjustment assembly cover.
2.
Verity that the button spring is in place.
^
If the button spring is missing or damaged, replace it with a new part.
^
If the button spring is out of position, return it to the proper position.
NOTE:
^
The button spring must be placed between the adjustment button, (cross shape protrusion inside of adjustment button) and the metal D-ring
frame. Refer to Fig. 1.
^
The button spring can be installed without removing the height adjustment assembly from the "B" Pillar. If removal of the 17 mm bolt becomes
necessary, make sure to retorque the bolt to 39-78 Nm (27-57 ft lbs)
3.
Verify proper operation of the seat belt shoulder height-adjuster.
4.
Reinstall the assembly cover.
