626 ES V6-2.5L DOHC (1997)
Seat Belt Reminder Lamp: Testing and Inspection
Pinpoint Test 11
Flowchart No. 11 Symptom Seat belt warning light and alarm do not operate
Possible cause
^
Damaged CPU
^
Damaged buckle switch
^
Open or short circuit in wiring harness
^
Poor connection of connector
Step 1
1. Disconnect the buckle switch connector.
Ohmmeter Connection
Reference
2. Check for continuity between terminals C and F of the switch.
3. If correct, go to Step 2.
4. If not as specified, replace the buckle.
Ohmmeter Connection
Action Chart
Step 2
Check for continuity between terminal F(B) of the buckle switch connector and ground.
Step 3
1. Remove the CPU from the joint box.