626 ES V6-2.5L DOHC (1997)
REPLACEMENT
1. Remove the rear wheel hub assembly from the vehicle.
2. Remove in the order shown in the figure.
NOTE: Tap the ABS sensor rotor off the wheel hub by using a chisel.
3. Install in the order shown in the figure.
NOTE:
-
Install a new rear ABS sensor rotor onto the wheel hub.
-
Using a steel plate and the special service tool, press the rotor until it is flush with the wheel hub.
4. Install the rear wheel hub assembly onto vehicle.
NOTE: The ABS sensor rotor can be installed in either direction.