626 ES V6-2.5L DOHC (1997)
Alternator: Specifications
Generator Specifications
Generator Specifications
Drive Belt Tension
Drive Belt
New
Used
Limit
A belt that has been on a running engine for less than 5
minutes.
Generator
690-880 N (70-90 kgf, 169-190 lbf)
500-680 N (50-70 kgf, 110-150 lbf) 440 N (45 kgf, 99 lbf)
Generator + A/C
690-880 N (70-90 kgf, 169-190 lbf)
500-680 N (50-70 kgf, 110-150 lbf) 440 N (45 kgf, 99 lbf)
Power Steering
540-680 N (55-70 kgf, 130-150 lbf)
400-530 N (40-55 kgf, 88-120 lbf)
340 N (35 kgf, 77 lbf)
Drive Belt Deflection
Drive Belt
New
Used
Limit
A belt that has been on a running engine for less than 5
minutes.
Generator
6.0-7.0 mm (0.24-0.27 in.)
7.0-8.0 mm (0.28-0.31 in.)
9.0 mm (0.35 in)
Generator + A/C
5.6-6.5 mm (0.22-0.25 in.)
6.5-7.5 mm (0.26-0.29 in.)
8.0 mm (0.31 in)
Power Steering
6.0-7.0 mm (0.24-0.27 in.)
7.0-8.0 mm (0.28-0.31 in.)
9.0 mm (0.35 in)
Generator
Type
A.C.
Output
12 V, 90 A
Regulator Type
Voltage Regulator in generator
Regulated Voltage
14.1-14.7 V
Brush Length
Standard
21.5 mm (0.85 in)
Minimum
8.0 mm (0.32 in)
Brush Spring Force
Standard
3.14-4.31 N (320-440 kgf, 0.71-0.96 lbf)
Minimum
1.57-2.35 N (160-240 kgf, 0.36-0.52 lbf)
Voltage at Generator Terminals
Terminals
Ignition: ON (V)
Idle (V)
B
B+
14.1-14.7
L
Approximate 1 V
13.2-13.8
S
B+
14.1-14.7
