626 ES V6-2.5L DOHC (1997)
3. Install intermediate shaft and steering shaft assembly.
a. Tighten bolt A after tightening bolt B.
b. Tighten bolt C with the steering shaft at its uppermost tilt position.
c. After installation, lightly tap the lower bracket at the point shown by using a hammer to verify correct installation.
CAUTION: Do not apply the shock in the axial direction of the shaft.
NOTE: If the tilt lever does not move easily, loosen nuts D, tap the lower bracket at the point shown and retighten.
4. Install the steering wheel.
^
Set the wheels in the straight-ahead position, and install the steering wheel.