626 ES V6-2.5L DOHC (1997)
Locknut
1. Install a new locknut and stake it as shown. Tighten to 236 - 318 Nm (174 - 235 ft. lbs.).
2. Tighten the stabilizer and shock absorber bolts and nuts to just under the specified torque. Lower the vehicle and tighten all bolts and nuts to
the specified torque with the vehicle unladen.
AFTER INSTALLATION
^
Check the wheel alignment.
With Drum Brakes
REMOVAL
^
Remove in the order shown in the illustration, referring to the following note: